Solar Lattice

Fault codes › ABB / FIMER › TRIO-20.0/27.6-TL-OUTD(-US)

ABB / FIMER TRIO-20.0-27.6-TL E015

Code
E015
Shown as
Bulk Cap Fail
Vendor severity
Error
Page
111
ID
fc:abb-trio-20-27-6-tl-outd-e15
IRI
https://solarlattice.org/kb/fc/abb-trio-20-27-6-tl-outd-e15
Status
active
Also known as
E015, e15, ABB / FIMER E015, Bulk Cap Fail
Category
Inverters
Class fault drafted · lead
Production not stated
Clears after a manual reset verified · fact

Decoded

May indicate DC link capacitor failure; look at DC link capacitor; do: inverter restart, contact manufacturer service.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same code in other families

Claims

defined_in

c1 drafted · lead FIMER TRIO-20.0-27.6-TL-OUTD Product Manual RevG

has_event_class

c2 drafted · lead Fault (device stops or needs intervention)

from the code prefix

indicates

c3 drafted · lead DC link capacitor failure

affects

c4 drafted · lead DC link capacitor

mitigated_by

c5 drafted · lead Inverter restart

c6 drafted · lead Contact manufacturer service

has_recovery

c7 verified · fact Manual reset (operator restarts or acknowledges)

Power cycle first; contact service if the fault persists afterwards.

verified by: review-workflowverified on: 2026-10-23review note: support check: partial - Power cycle then contact service is stated, but clearing by manual reset is not stated.

applies_to

c8 drafted · lead TRIO-20.0/27.6-TL-OUTD string inverter

Data