Solar Lattice

Fault codes › ABB / FIMER › FIMER PVS-60-TL-US

ABB / FIMER PVS-60-TL E058

Code
E058
Shown as
Pin vs Pout check error
Vendor severity
Error
Page
159
ID
fc:abb-pvs-60-tl-us-e58
IRI
https://solarlattice.org/kb/fc/abb-pvs-60-tl-us-e58
Status
active
Also known as
E058, e58, ABB / FIMER E058, Pin vs Pout check error
Category
Inverters
Class fault drafted · lead
Production not stated
Clears after a manual reset drafted · lead

Decoded

Reports AC DC power deviation; look at inverter; do: inverter restart, contact manufacturer service.

What can be behind AC DC power deviation

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-166-175-TL E058, ABB / FIMER TRIO-20.0-27.6-TL E058, ABB / FIMER UNO-DM-3.3-5.0-PLUS E058, ABB / FIMER UNO-DM-6.0-PLUS E058
KACO new energy
KACO new energy blueplanet TL3 102
SMA
SMA SC-CP-XT 6486

Same code in other families

Claims

defined_in

c1 drafted · lead FIMER PVS-60-TL-US Product Manual RevB

has_event_class

c2 drafted · lead Fault (device stops or needs intervention)

from the code prefix

reports

c3 drafted · lead AC DC power deviation

affects

c4 drafted · lead Inverter

mitigated_by

c5 drafted · lead Inverter restart

review note: support check: partial - Restart is implied as a first step, but the passages don't say it mitigates the fault.

c6 drafted · lead Contact manufacturer service

If it persists after a power cycle

has_recovery

c7 drafted · lead Manual reset (operator restarts or acknowledges)

Power cycle first; then service

review note: support check: partial - The power-cycle-then-service sequence is stated, but the passages don't say the fault clears by manual reset.

applies_to

c8 drafted · lead FIMER PVS-60-TL-US string inverter

Data