Solar Lattice

Product

Solis S6-EH2P(9.6-16)K-SV-YD-L-US

ID
prod:solis-s6-eh2p-l-us
IRI
https://solarlattice.org/kb/prod/solis-s6-eh2p-l-us
Status
active
Also known as
S6-EH2P9.6K03-SV-YD-L-US, S6-EH2P10K03-SV-YD-L-US, S6-EH2P11.4K03-SV-YD-L-US, S6-EH2P12K03-SV-YD-L-US, S6-EH2P14K03-SV-YD-L-US, S6-EH2P16K03-SV-YD-L-US
Category
Inverters
Make
solis
Product level
family

The Solis S6-EH2P(9.6-16)K-SV-YD-L-US is a Solis inverter family. The applicable models listed are the 9.6, 11.4, 12, 14 and 16 kW versions. Each model's nameplate rating is also its maximum AC output power, shared between the grid and backup ports. According to the datasheet table, the inverter can carry two times its rated power for 10 seconds. The inverter runs an AFCI self-test. If the test fails it shows AFCI-Check, and the first step is to restart the system and see whether the fault comes back. DCInj-FAULT means the DC component of the output current is over the limit. Check the grid and the AC cable connections, then restart. BatName-FAIL means the battery brand selected does not match the battery actually installed. 12Power-FAULT is a 12 V undervoltage failure, so check the grounding and look for wires leaking current to ground. The manual includes an SGS certificate of compliance, number SGSNA/25/GZ/00140.

<!-- review notes

Claims

manufactured_by

c1 drafted · lead Solis

rated_power

c2 drafted · lead nominal 9.6 KiloW

Conditions: Nameplate rating, 9.6 kW model; also the maximum AC output to grid and backup combined

review note: possible conflict with c3 (same source; check the conditions); possible conflict with c4 (same source; check the conditions); possible conflict with c5 (same source; check the conditions); possible conflict with c6 (same source; check the conditions)

c3 drafted · lead nominal 11.4 KiloW

Conditions: Nameplate rating, 11.4 kW model; also the maximum AC output to grid and backup combined

review note: possible conflict with c2 (same source; check the conditions); possible conflict with c4 (same source; check the conditions); possible conflict with c5 (same source; check the conditions); possible conflict with c6 (same source; check the conditions)

c4 drafted · lead nominal 12 KiloW

Conditions: Nameplate rating, 12 kW model; also the maximum AC output to grid and backup combined

review note: possible conflict with c2 (same source; check the conditions); possible conflict with c3 (same source; check the conditions); possible conflict with c5 (same source; check the conditions); possible conflict with c6 (same source; check the conditions)

c5 drafted · lead nominal 14 KiloW

Conditions: Nameplate rating, 14 kW model; also the maximum AC output to grid and backup combined

review note: possible conflict with c2 (same source; check the conditions); possible conflict with c3 (same source; check the conditions); possible conflict with c4 (same source; check the conditions); possible conflict with c6 (same source; check the conditions)

c6 verified · fact nominal 16 KiloW

Conditions: Nameplate rating, 16 kW model; also the maximum AC output to grid and backup combined

verified by: review-workflowverified on: 2026-10-24review note: possible conflict with c2 (same source; check the conditions); possible conflict with c3 (same source; check the conditions); possible conflict with c4 (same source; check the conditions); possible conflict with c5 (same source; check the conditions)

implements

c7 drafted · lead Backup power

Datasheet table gives a maximum AC output power shared by the grid and backup ports.

review note: support check: partial - Table shows AC output power to both grid and backup, implying backup output, but backup power function isn't explicitly stated.

c8 drafted · lead DC arc-fault protection

An AFCI self-test runs; a failed test shows the AFCI-Check message.

c9 verified · fact DC injection limitation

DCInj-FAULT is raised when the DC component of the output current goes over the limit.

verified by: review-workflowverified on: 2026-10-24

Referenced by

Data