Advantech ADAM-6000 Ethernet I/O modules

The ADAM-6000 is a family of Ethernet I/O modules for industrial use. It includes the 18-channel ADAM-6050, the ADAM-6051 with a 2-channel counter, and the source-type ADAM-6052, all of them isolated digital I/O modules. Each module has one RJ-45 10/100 LAN port and plug-in screw terminals for I/O and power. It runs on a 10 to 30 VDC supply and draws about 2 W at 24 VDC. Using peer-to-peer and Graphic Condition Logic, a module can run on its own for measurement and control, with no separate controller or programming. You can also define your own Modbus addresses. Both a system watchdog and a programmable communication watchdog are built in. If communication is lost, the digital outputs can go to predefined safe values. The datasheet lists FCC, CE and UL certification and a Class I, Division 2 hazardous locations rating.

<!-- review notes

• sentence 1: support check: partial - Names and channel counts are supported, but ADAM-6050 is listed as 18-ch and ADAM-6051 as 14-ch with counter, ADAM-6052 16-ch; 'all isolated digital I/O' holds, though statement's wording is loose and fine; main issue is nothing contradicts, yet 'family' framing is inferred. -->