Burndy HYDENT compression connectors

Burndy HYDENT is a family of compression connectors and terminals, including Medium and Large HYDENT terminals, that are installed by crimping. Use them with matching Burndy dies and installation tools, because Burndy designs its connectors, dies and tools to work together as one engineered system. Before crimping, pick the HYDENT connector that suits the conductor, check that the markings on the conductor and connector match, and strip the insulation to the needed length. Connectors for Class A, B and AA code conductors carry solid colour bands on the barrel, while those for flexible Class G, H, I, K and M conductors use colour-coded lettering and narrow bands. On a seamless barrel the crimp orientation is not critical, and alternating the crimp direction on Medium and Large terminals does not harm the connection. The aluminium connectors are dual rated for both aluminium and copper code conductors.

<!-- review notes

• sentence 1: support check: partial - Medium and Large HYDENT terminals and crimping are supported, but 'family of connectors and terminals' is only loosely implied.
• sentence 1: review: partial - Crimp instructions for Medium and Large HYDENT terminals are shown, but the compression-connector passage is generic Burndy text and never calls HYDENT a family of connectors and terminals. -->