c1 verified · fact Wi-Fi module
The inverter reports that its built-in Wi-Fi module is defective.
- STP33-62-US-41 ops manual
sec=h231h=d241890c1ecd - STP33-62-US-41-BA-en-13
sec=h314h=d241890c1ecd
verified by: review-workflowverified on: 2026-10-20
This failure means the Wi-Fi module built into the inverter is defective, and the inverter reports it as a faulty Wi-Fi module. A related event message tells you that an update of the Wi-Fi module did not succeed. While the inverter is still updating the Wi-Fi module, it shows a separate status message, so wait for the update to finish before you judge the result. If the update fails, start it again. If the failure message shows up again after the retry, contact the manufacturer's Service.
<!-- review notes
affectsc1 verified · fact Wi-Fi module
The inverter reports that its built-in Wi-Fi module is defective.
sec=h231 h=d241890c1ecdsec=h314 h=d241890c1ecdverified by: review-workflowverified on: 2026-10-20
The Wi-Fi module sits inside the inverter.
sec=h231 h=d241890c1ecdsec=h314 h=d241890c1ecdverified by: review-workflowverified on: 2026-10-20
mitigated_byc3 drafted · lead Firmware update
If the Wi-Fi module update fails, run the update again.
tbl=10.r4 h=622dc8a01f0etbl=21.r4 h=622dc8a01f0ereview note: support check: partial - Retrying the update is stated for the update-failure message (7352), but not as a mitigation for the defective module fault; the firmware update is only a retry action.
c4 drafted · lead Contact manufacturer service
Contact Service if the update-failure message comes back after a retry.
tbl=10.r4 h=622dc8a01f0etbl=21.r4 h=622dc8a01f0ereview note: support check: partial - Contact Service is stated for a repeated update-failure message, not for the faulty-module failure itself.
indicates c2indicates c2indicates c4